• FEH-320 (5-Axis Tilting Swiveling Rotary Table) CNC Rotary Table Pneumatic Brake
FEH-320
  • Table diameter provides a choice of Ø320mm.
  • Employs high rigidity, extra large radial and axial bearing.
  • Upon customer request, models with Ø170, Ø210, Ø250 can be equipped with Japanese made worm/worm gear.
  • For models over 255, the tilting axis employs the latest full circumference brake, featuring even braking force without runout. Maximum clamping area, higher clamping force, no vibration and no braking delay is required. High torque combined with compact, rigidity and enclosed structure ensure high cutting quality.
  • For models over 170, all support units employ the full circumference brake and large hole Japanese-made roller bearing.

 FEH-320 (5-Axis Tilting Swiveling Rotary Table) CNC Rotary Table Pneumatic Brake

Inquiry
Specifications
MODEL UNIT FEH-320
Table diameter mm Ø320
Center hole diameter mm Ø120H7
Through-hole diameter mm Ø120
90° Vertical height mm 270
0° horizontal height mm 370
T-slot width of table mm 14H7
Guide key width on tilting axis mm Ø18h7
Min.setting angle deg. 0.001
Servo motor model Motor Brand

Tilt axis

Swiveling axis(Stra.)
FANUC α8i / ß12is α8i / ß12is
Mitsubishi HF-204S HF-154S
Positioning accuracy sec. 50 15
Repeatability sec. 8 6
Clamping torque Pneu. 5~7kg/cm² N.m - -
Hyd. N.m 1300
(25-30 kg/cm²)
1180
(25-30 kg/cm²)
Teeth ratio - 1:120 1:120

Max. table speed (FANUC a motor)

rpm 16.6 16.6
Allowable load capacity 0° Horizontal kg 200
0°-90°Vert. kg 110
Allowable cutting force
(Clamped status)
F N 20000
FxL N.m 1180
FxL N.m 1180
Allowable torque on worm gear N.m 780
Tilting angle kg/cm² +30~-120
Allowable inertia J=W.D²/8 deg. 2.7
Weight (Motor excluded) kg 600
*The specifications, dimensions and design characteristics shown in this catalogue are subject to change without prior notice.
Dimensional Drawings
FEH-320 (5-Axis Tilting Swiveling Rotary Table) CNC Rotary Table Pneumatic Brake