• SUHC-200V (Vertical Tooth Type Hydraulic Positioning) Tooth Type Rotary Table
  • SUHC-200V (Vertical Tooth Type Hydraulic Positioning) Tooth Type Rotary Table
SUHC-200V
  • Table diameter provides a choice of Ø200mm, etc.
  • Employs three-piece clutch gear with accuracy reaching ±5 sec. Suitable for heavy cutting.
  • Choice of 4, 6, 8, 12 and 24 indexes.
  • Choice of special indexes 2, 3, 5, 9 . ...

 SUHC-200V (Vertical Tooth Type Hydraulic Positioning) Tooth Type Rotary Table

Inquiry
Specifications
MODEL UNIT SUHC-200V
Table diameter mm Ø200
Center hole diamet mm Ø30H7
Center hole depth mm 35
Through hole diameter mm Ø27
Height of center (Vertical) mm 160
Height of table (Horizontal) mm 180
T-slot width of table mm 12H7
Width of guide block mm 18h7
Indexing number (Standard) - 4/6/8/12/24(Standard indexes)
Indexing number (Spec.) - 2/3/5/9(Special indexes)
Indexing accuracy sec. ±5
Repeatability sec. ±2
Clamping method Hyd. pressure kg/cm² 35
Unclamp / clamp time s 0.7/0.1
Time of rotating90° s 1.5
Clamping torque kg-m 25
N 245
Allowable instant inertia J=W.D²/8 kg-m² 7
Allowable load Vertical kg 95
Horizontal kg 120
Allowable cutting force
(Clamped status)		 F kgf 1260
N 12348
FxL kgf.m 55
N.m 539
FxL kgf.m 108
N.m 1058
Weight (Motor excluded) kg 55
*The specifications, dimensions and design characteristics shown in this catalogue are subject to change without prior notice.
Dimensional Drawings
SUHC-200V (Vertical Tooth Type Hydraulic Positioning) Tooth Type Rotary Table
Back to List