• SUHC-320V (Vertical Tooth Type Hydraulic Positioning) Tooth Type Rotary Table
  • SUHC-320V (Vertical Tooth Type Hydraulic Positioning) Tooth Type Rotary Table
SUHC-320V
  • Table diameter provides a choice of Ø320mm, etc.
  • Employs three-piece clutch gear with accuracy reaching ±5 sec. Suitable for heavy cutting.
  • Choice of 4, 6, 8, 12 and 24 indexes.
  • Choice of special indexes 2, 3, 5, 9 . ...

 SUHC-320V (Vertical Tooth Type Hydraulic Positioning) Tooth Type Rotary Table

Inquiry
Specifications
MODEL UNIT SUHC-320V
Table diameter mm Ø320
Center hole diamet mm Ø65H7
Center hole depth mm 15
Through hole diameter mm Ø31
Height of center (Vertical) mm 230
Height of table (Horizontal) mm 210
T-slot width of table mm 14H7
Width of guide block mm 18h7
Indexing number (Standard) - 4/6/8/12/24(Standard indexes)
Indexing number (Spec.) - 2/3/5/9(Special indexes)
Indexing accuracy sec. ±5
Repeatability sec. ±2
Clamping method Hyd. pressure kg/cm² 35
Unclamp / clamp time s 0.6/0.1
Time of rotating90° s 2.5
Clamping torque kg-m 60
N 588
Allowable instant inertia J=W.D²/8 kg-m² 21.25
Allowable load Vertical kg 200
Horizontal kg 300
Allowable cutting force
(Clamped status)		 F kgf 1560
N 15288
FxL kgf.m 145
N.m 1421
FxL kgf.m 332
N.m 3254
Weight (Motor excluded) kg 125
*The specifications, dimensions and design characteristics shown in this catalogue are subject to change without prior notice.
Dimensional Drawings
SUHC-320V (Vertical Tooth Type Hydraulic Positioning) Tooth Type Rotary Table
Back to List